Metal roofing in Jacksonville, FL has become the go-to choice for homeowners and commercial property owners who want a roof that handles decades of intense sun, heavy rain, and hurricane-force wind without constant maintenance. Cache Roofing is a metal roofing contractor, not a panel supplier: we measure, fabricate the trim, install the membrane and panels, and stand behind the work. Call (904) 887-7663 for a free estimate on a standing seam or 5V metal roof.
Why Metal Roofing Works in Florida
Metal reflects heat instead of absorbing it, which cuts cooling costs during the summer months. FPL estimates that reflective roofing reduces cooling expenses by 10 to 25%. A metal roof’s lifespan reaches 40 to 70 years depending on the metal, versus 15 to 20 years for a typical shingle roof, so you are not planning another replacement in two decades. Metal will not rot or crack, and systems installed to the Florida Building Code are rated for the wind exposure we get on the coast. If you are weighing metal against other materials, start with Thinking of a Tin Roof? Read This First.
Metal Roofing Systems We Install
Standing seam. The premium option. Raised seams run vertically along the panels with concealed fasteners, which improves both appearance and wind resistance because there are no exposed screws to back out or leak. The clean lines work with modern and traditional homes and suit HOA guidelines in communities such as Nocatee and Silverleaf.
5V crimp. A traditional Florida profile at a lower price point. The exposed fasteners require periodic inspection, but 5V systems perform well and suit historic and craftsman-style homes.
Corrugated. Works for outbuildings, patios, porches, and homes where the wave pattern fits the design.
We install residential and commercial metal roofs on both new construction and roof replacement projects. For commercial decisions, read Metal or Tile? How to Choose the Right Commercial Roof in Florida.
Metal Roof Installation in 3 Steps
- Measurement and planning. Each installation starts with accurate measurements and layout planning. We map ventilation requirements, flashing points, and penetrations such as chimneys and skylights, and use CAD layout to minimize waste and maximize wind resistance.
- Fabrication. We fabricate flashings and trim to match your roof geometry. Valley flashings get built-in cleats for waterproofing, and ridge and hip details are designed to keep water and debris out.
- Membrane and panel installation. Before any metal goes on, we install a waterproof membrane designed for metal applications. Panels are then fastened according to manufacturer specifications for North Florida wind ratings, and the site is cleaned daily.
Metal Roofing for Homes Near the Coast
Saltwater exposure creates challenges in Jacksonville Beach, Ponte Vedra, and along the Intracoastal. We use aluminum or Galvalume-coated steel rated for coastal environments: aluminum resists rust naturally, and Galvalume’s zinc-aluminum coating outlasts standard galvanized steel in salty air. Kynar and PVDF finishes resist fading and chalking and carry 30-year finish warranties in coastal applications. For properties within a few miles of saltwater we recommend aluminum or premium-coated steel.
Metal Roof Repair
Metal roofs need far less maintenance than tile or shingle, but they are not maintenance-free. Fasteners can back out over time from thermal cycling, sealants at penetrations dry out after 15 to 20 years, and branches can scratch coatings and create rust spots. We repair punctures, reseal seams and penetrations, replace fasteners, and swap panels when needed, and we handle emergency metal roof repair throughout the Jacksonville area. Oil canning, the visible waviness in flat panel areas, is cosmetic rather than a failure; our post Oil Canning: What It Is and How to Protect Your Metal Roof explains how to minimize it. General repair services are on our roof repair page.
How Much Does a Metal Roof Cost in Jacksonville?
Metal costs more upfront than shingles. Material and labor typically run $12 to $18 per square foot installed in the Jacksonville area, depending on the system type and roof complexity. Standing seam costs more than 5V crimp because of the concealed fastener system and the fabrication involved. Other factors: panel gauge and metal (aluminum versus steel), finish, roof pitch and the number of penetrations, and whether the job is a tear-off replacement or new construction.
Weigh that against 40 to 50 years of service with minimal maintenance and lower cooling bills, and the long-term value is clear. Financing is available through Enhancify with amounts up to $200,000, rates from 7.99% APR, and a soft credit check.
Warranty
A metal roof from Cache Roofing carries the panel manufacturer’s material and finish warranties for the system installed plus our written workmanship coverage for the term in your agreement. We provide the product specifications, warranty level, and any registration requirements before installation.
Why Choose Cache Roofing for Metal Roofing
- Florida Certified Roofing Contractor CCC1336213, fully insured; we install, not just supply
- Local Jacksonville company serving North Florida since 2005
- Standing seam, 5V, and corrugated systems for residential and commercial buildings
- Custom-fabricated flashing and trim, waterproof membrane under every panel
- Free written estimate and financing available
Metal Roofing Across North Florida
We install and repair metal roofs throughout Jacksonville and in Jacksonville Beach, Atlantic Beach, Neptune Beach, Ponte Vedra Beach, Nocatee, St. Augustine, World Golf Village, Palm Coast, Fernandina Beach, Amelia Island, and Gainesville. See all service areas.
Frequently Asked Questions
How much should a metal roof cost in Florida?
In the Jacksonville area, installed metal roofing typically runs $12 to $18 per square foot for material and labor, with standing seam at the upper end and 5V crimp at the lower end. Roof complexity, metal type, and finish move the number within that range.
What is the biggest problem with metal roofs?
The most common issues are exposed fasteners backing out on 5V and corrugated systems and sealant drying out at penetrations after 15 to 20 years, both of which periodic inspection catches early. Oil canning is a frequent cosmetic complaint but does not affect performance.
Is it cheaper to put on a metal roof or shingles?
Shingles are cheaper upfront; metal costs more to install but lasts two to three times longer, needs less maintenance, and lowers cooling costs, so it is often the cheaper choice over the life of the home.
Are metal roofs noisy in the rain?
Not with modern installation. Solid decking, underlayment, and attic insulation dampen sound, and most homeowners report their metal roof is no louder than their previous shingle roof.
How does a metal roof hold up to hurricanes?
Metal systems installed to the Florida Building Code are rated for winds over 140 mph. Standing seam with interlocking panels and concealed fasteners provides especially strong wind resistance.
Will a metal roof rust near the coast?
Aluminum does not rust, and Galvalume-coated steel resists corrosion well in coastal environments. We recommend aluminum or premium-coated steel for properties within about 3 miles of saltwater.